




















Technical Information

- 460 kg (1,014 lbs.)
- Width 720 mm (28.3 in.) x Depth 785 mm (30.9 in.) x Height 1,785 mm (70.3 in.)
- Disc-type
Step section 98.5 mm (3.8 in.) diameter, 10 ±0.3 mm (0.39 in.) height

Body section less than 95 mm (3.74 in.) diameter, 35 mm (1.38 in.) max. height - Pin-type
Pin diameter 6 mm (0.24 in.), number of loadable workpieces: 6 - Loadable workpiece weight
Up to 1,650 g (3.64 lbs.) - Number of loadable adapters: 1
Operating speed: XYZ axis 6,000 mm/min (236.2 in/min), A/B axis 15 / 7.5 rpm
Spindle rotating speed: 10,000 to 60,000 rpm
Spindle output: Rated 650 W (peak 1.6 kW)
Rotary axis travel angle: A ±360°, B ±35°
Up to 15 pieces (+1 dummy pin)
Shank diameter: 6 mm (0.24 in.)
Length: max. 75 mm (2.95 in.) (collet gripping margin: 17 mm (0.67 in.))
DGSHAPE genuine milling burs only
Interface: LAN (USB connection is for service and emergency use only)
Control command sets: RML-1, NC code
Power requirements: AC 100 V to 240 V ±10%, 50/60 Hz (overvoltage category II, IEC60664-1), 4 A
Power consumption: 350 W
ZMA-70 Disc-type material adapter (additional / replacement set of 3)
ZV-70 Pin-type material adapter (holds up to 6 blocks)
AK-70-DE / AK-70-GE / AK-70-ME / AK-70-NT Custom abutment adapter (DESS / GeoMedi / MEDENTiKA / Dental)
ZC-70 Replacement collet
ZM-70 Additional / replacement milling bur magazine
ZR-70 Adapter rack for up to 8 adapters
DGSHAPE Genuine Milling Burs for DWX-70WD
*1 Even when made from the described materials, some workpieces cannot be milled due to specifications or physical properties.
*2 Operation of this product requires a coolant additive, chiller, dust collector, air compressor, milling burs (sold separately) and internet connection. Please contact your dealer for details.

