„„Tmax 1300 °C
„Working temperature up to 1280 °C, depending on the CoCr material
„Single-phase connection
„Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
„Double-walled housing made of textured stainless steel provide for low surface temperatures
„Gas supply system with solenoid valve and flow meter
„Forced cooling system with compressed air
„Sintering bell with good sealing for sintering up to 30 single crowns under argon
„Sintering pearls, Ø 1,25 mm (200 g) included in delivery scope
„Special tongs included in the delivery scope
„Type S thermocouple
„Freely programmable controller C450 allows for automatic temperature control and switching of the gas flow
„Switching system with solid-state-relays to switch the heating
„Two different gas flows can be set for the optimal adaptation to the sintering cycle
„Defined application within the constraints of the operating instructions
„NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive sintering pearls provides for good sintering results in a nearly oxygen-free atmosphere at very low argon consumption.

The system is open and can be programmed for various materials up to sintering temperatures of 1300 °C. Two preinstalled sample programs, which can be adjusted individually. Furthermore, the sintering furnace LT 02/13 CR is designed for a single-phase connection.

Additional equipment

„Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with
EN 60519-2 as temperature limiter to protect the furnace and load
„Process control and documentation via VCD software package for monitoring,